Power Platform Community Forum Thread Details

Hi all,

I'm trying to prepare solution for the connector certification. It's update, we have already connector certified.

I'm running solution validation, as described here (https://learn.microsoft.com/en-us/connectors/custom-connectors/validate-custom-connector), but I have problem to get through connector icon validation.

Create a logo with 1:1 dimensions within a range of 100 x 100 to 230 × 230 pixels (no rounded edges). icon-prod.png is 215x215
Use a non-transparent, nonwhite color () background, and not-default color (#007ee5) that matches your specified icon background color. our brand color is #F8F8F8 and icon background is matching it.
Ensure the icon is unique to any other certified connector icon. well, it is upgrade, so it is similar to our existing icon, although not identical, mainly because exactly these requirements here.
Submit the logo in PNG format as <icon>.png. yes, it is PNG file and I have uploaded it into solution builder and it works ok.
Set logo dimensions below 70% for the image's height & width with a consistent background. see attached "logo-large-with-dimensions.png", where image has 5 inches and logo within it has 3.5 inches, which is 70%, right?
Ensure brand color is a valid hexadecimal color and shouldn't be white () or default (#007ee5). yes, again brand color is #F8F8F8 and logo background is matching it.

Is there any further trick or unlisted requirement, which we are failing to meet?

Thanks, Tom