Attachment control - files are added at the top of the control

Like (0) Share

Report

Posted on 20 Aug 2020 08:09:33 by KotaroKo

133

Hi, guys! I am using attachment control, but the problem is the files that I upload are added at the top of the attachment and not under it. I remember that by default the files were added under the control. What can I do to change this?

All responses (2)

Answers (1)

KotaroKo 133 on 21 Aug 2020 at 07:07:13

Like (0)

Report

Re: Attachment control - files are added at the top of the control

Hi, Qi.
Thank you for the reply.
Yes, I add attachments within the edit form & yes, I want the uploaded file to be added at the bottom of the control.
I see that at this moment it is not possible.
Thank you.

Best Regards,
Kotaro
Verified answer

v-qiaqi@microsoft.com on 21 Aug 2020 at 06:59:16

Like (0)

Report

Re: Attachment control - files are added at the top of the control

Hi@KotaroKo，
Could you please share a bit more about your scenario, do you add attachments within an EditForm?
Do you want the uploaded file to be added to the bottom of the control?
I have a test which is confirmed on my side, you can check the following steps for reference.
You can see that an entire Attachment control within a data card as below:
Every file is added automatically up to the attach button which is designed by default. If you want this kind of UI design could be customized, you can raise your idea here:
https://powerusers.microsoft.com/t5/PowerApps-Ideas/idb-p/PowerAppsIdeas
Best Regards,
Qi