The gateway did not receive a response within the specified time period

(0) Share

Report

Posted on by daydinho10

124

I am using Power Automat Free trial.

I am Scheduling flow to run Power Automate Desktop. It was working fine in the last two weeks since I started. Since yesterday, the flow stops running and showing the error as mentioned in the title. Does it matter if my flow is quite long?

I look at a different post and they said it is temporary, is this happen to anybody?

Categories:

Power Automate Desktop

I have the same question (0)

All responses (7)

Answers (1)

Community Power Pla... on at

Like (0)

Report

@daydinho10 Same things happen to me.

You can try one thing, and check if it works or not?
1. Go to Service.msc and Restart UIFlowService.
2. Go to the on-premise data gateway and Restart the gateway service.

Now refresh the flow and run again.

Thanks,
Bansari Pandya.

Was this reply helpful? Yes No
Verified answer

daydinho10 124 on at

Like (0)

Report

@Anonymous
Thank you very much, I have managed to get it fixed by increasing the Timeout limit. I did not have the problem in the past because the flow loaded within two minutes. When I added more steps, the loading time increase and that cause the error.

What I did to fix the error was as below
Right-click on the 3 dots in the flow that use in running Desktop flow >>Setting and then set the Timeout limit to PT5M (5 minutes)

Was this reply helpful? Yes No
rahul1231 30 on at

Like (0)

Report

I did change the time-out duration but again the same error. what is the solution?

Was this reply helpful? Yes No
daydinho10 124 on at

Like (0)

Report

You may wait a few days if you changed the time out and it is still not working, my feeling is it is temporary.

Was this reply helpful? Yes No
rahul1231 30 on at

Like (0)

Report

Hi, I have waited a few days after I changed the time out but it is still not working. any help please?

Was this reply helpful? Yes No
daydinho10 124 on at

Like (0)

Report

If this post method doesn't help, I would recommend creating a new post since this post solution has been accepted, and most professional guys out there looking for the post that is not getting the solution. Please also attach a capture of the error message.

Was this reply helpful? Yes No
rahul1231 30 on at

Like (0)

Report

done. @daydinho10

Was this reply helpful? Yes No