Unanswered

Flow Turning off over weekend

(5) Share

Report

Posted on by ChiPower20

Good Morning ! The last 2 weekends on Monday morning it seems my flow gets turned off. I am the only person that has access to it . Any reason why it would automatically turn off. Weekdays its fine but weekends it powers off

Categories:

General topics

I have the same question (0)

All responses (15)

Answers (0)

Mithlogie 28 on at

Like (3)

Report
Copy link

Link copied!

I have the same issue. The flow was turned off without any action taken on my part. Both this weekend and the previous. Mine is a team flow, and when it happened last weekend I removed those other owners. But, it still was turned off this weekend without any action taken.

Was this reply helpful? Yes No
chico 638 on at

Like (2)

Report
Copy link

Link copied!

ok I'm officially hoping on board!

Saw this post when it first went up and thought nothing of it.
Then saw that one of mine - was suddenly turned off.
No one else has access to these but me...

Today, noticed again that its suddenly turned off..
no reason that is obvio
but going to keep a close eye out to see when it turns off again.

Was this reply helpful? Yes No
AngryBatVoice 203 on at

Like (3)

Report
Copy link

Link copied!

I am having the same problem. The flow is triggered by a weekly Recurrence step. It has been operating fine for over a year, but now it turns itself off at some point between trigger periods. If I turn the flow back on and manually run it, it is successful. There is no "STOP FLOW" action in the flow. Also, once I've turned it on and manually run it, it doesn't turn itself back off right away. I'm going to keep a closer eye on when it turns itself back off. But there's no logs or errors that I can see to indicate a problem.

UPDATE: I checked the status of the flow twice a day every day, once at 8AM (Central US) in the morning, once at 10PM (Central US) in the evening. The flow turned itself off sometime between Saturday at 10PM and Sunday at 8AM

Was this reply helpful? Yes No
MHaney-YEC 29 on at

Like (3)

Report
Copy link

Link copied!

Same issue happening for me with one of the three flows I have running, and no "STOP" actions are in the flow. It isn't turning off on the weekend though, the timing is random (it ran a few times on Monday, then today it wouldn't run as sometime after Monday afternoon it got turned off).

No idea what to do here but it's becoming a real problem as this has been going on for about a month now.

Was this reply helpful? Yes No
Mithlogie 28 on at

Like (3)

Report
Copy link

Link copied!

Yes, this started about a month ago for me as well, I think I first noticed them turned off around February 16.

Was this reply helpful? Yes No
MHaney-YEC 29 on at

Like (3)

Report
Copy link

Link copied!

I just found another post about this where an MS tech responded with an idea to create a scheduled flow that runs every few minutes, which just turns on a flow... Essentially just turn on your flow every 5 minutes or so to make sure it is on. Seems like a silly way to 'fix' it, but will probably do the trick.

I created this in my tenant to turn on the two flows I need running, and hope that 'fixes' the issue.

Was this reply helpful? Yes No
chico 638 on at

Like (1)

Report
Copy link

Link copied!

@MHaney-YEC
got any screenshot examples of the steps to "turn on a flow"?

Was this reply helpful? Yes No
MHaney-YEC 29 on at

Like (2)

Report
Copy link

Link copied!

@chico check out the posted solution from this thread:
https://powerusers.microsoft.com/t5/Using-Flows/My-flows-keeps-being-turned-off-constantly/m-p/478532#M12216

Was this reply helpful? Yes No
chico 638 on at

Like (1)

Report
Copy link

Link copied!

@MHaney-YEC
Appreciate the pointer!
thank you!

Was this reply helpful? Yes No
AngryBatVoice 203 on at

Like (4)

Report
Copy link

Link copied!

@MHaney-YEC wrote:
I just found another post about this where an MS tech responded with an idea to create a scheduled flow that runs every few minutes, which just turns on a flow... Essentially just turn on your flow every 5 minutes or so to make sure it is on. Seems like a silly way to 'fix' it, but will probably do the trick.

I created this in my tenant to turn on the two flows I need running, and hope that 'fixes' the issue.

Yeah, that probably works, but what keeps this new flow from developing this issue of turning itself off? Do we then need a scheduled flow to turn on the scheduled flow that turns on the original flow? Come on, Microsoft.

Was this reply helpful? Yes No