Unanswered

Error code when trying to save my work.

(1) Share

Report

Posted on by S4MWEL

Trying to save a flow I have spent 10 hours working on, and this is the error code I keep getting? I really need to save my work unless I will lose it all! The flow checker tells me there are no errors, however this is the code I get when I attempt to save my work!

Flow save failed with code 'InvalidTemplate' and message 'The template validation failed: 'The inputs of template action 'Condition_1' at line '1 and column '5839' is invalid. Action 'Apply_to_each' must be a parent 'foreach' scope of action 'Condition_1' to be referenced by 'repeatItems' or 'items' functions.'.'.

Here is a SS of condition 1 in my flow:

Thank you in advance!

Categories:

Building flows

I have the same question (0)

All responses (3)

Answers (0)

Sort by

Manish Solanki 15,169 Moderator on at

Like (2)

Report
Copy link

Link copied!

Hi @S4MWEL

It looks like you had copied left branch & pasted it to create middle & right side branch. Post copying the name of the action "Apply to each" has been changed for middle & right branches (Apply to each 1 & Apply to each 2). You need to modify condition actions for middle & right side branch to include output property from respective "Apply to each" action as those are still referring original 'Apply to each' action.

If this helps & solves your problem, please remember to give a 👍 and accept my solution as it will help others in the future.

Was this reply helpful? Yes No
S4MWEL 3 on at

Like (1)

Report
Copy link

Link copied!

Does this mean I need to remove all copy and pasted conditions and do them again manually? What do you mean by

"modify the condition actions for middle & right side branch to include output property from respective "Apply to each" action"

Sorry I am brand new to Automate but thank you so much for helping!

Was this reply helpful? Yes No
Manish Solanki 15,169 Moderator on at

Like (1)

Report
Copy link

Link copied!

I meant to say that just reselect the columns from dynamic content window in condition action for middle & right branch. When you reselect the columns those will be from the output of "Apply to each 1" & "Apply to each 2" action. This way references of original "Apply to each" output have been removed from both branches.

If this helps & solves your problem, please remember to give a 👍 and accept my solution as it will help others in the future.

Was this reply helpful? Yes No