You’re offline. This is a read only version of the page.
6
Hi all,
I'm having an issue with using connecting to the Dynamic content from a Filter Array connector. When I first set up this Flow, I was able to access the dynamic content. I went in to edit my flow and no longer have the option of Dynamic Content from the Filter Array step.
I tried creating a new flow following the same steps as in the first, but still, no luck connecting that Dynamic Content.
Has anyone seen this problem, or solved it previously?
I finally came up with a resolution. Since the Filter Array columns don't show as dynamic options, instead do a function: item()?['Title'], item()?['DueDate'], etc. It's not as easy to read when you're initially building and testing the flow (shows as item()), but when you re-enter the editor fresh it shows the column name.
Hi Mona,
I'm only having issues when I filter the list of results from the "Get records" action for D365 for Operations.
The filter array Dynamic Content is working for all of the other connectors I try, including other D365 for Operations connectors...
Unfortunately the Get Records action is the only one I can use for what I'm hoping to accomplish. Is there anything I can do to trouble-shoot this?
Best,
Bill
Hi @Bill_Z,
I cannot reproduce your issue. After saving the flow, I edit the flow again, the dynamic content from the Filter Array action still shows in the list like this:
Can you please try with some other connectors to create a similar flow
Regards,
Mona
#1
WarrenBelz
146,631
Most Valuable Professional
#2
RandyHayes
76,287
Super User 2024 Season 1
#3
Pstork1
65,991
Most Valuable Professional
Share
Report
All responses (
Answers (
