Unanswered

Is using case for number range possible

(0) Share

Report

Posted on by PennyP

I am building a flow based on a new response and on the form they have to fill in a number. I then have a range of 0-1499, 1500-3499, 3500-8499 and finally 8500+. Am I able to use case for a range so if they type in 1200 the case would be 0-1499 and follow that flow or can I use if statements to achieve this and if so how would I do that?

Many Thanks

Categories:

Building flows

I have the same question (0)

All responses (4)

Answers (1)

Verified answer

Hardesh15 7,087 Super User 2024 Season 1 on at

Like (0)

Report

@PennyP
You need two variables first for lower limit and second for upper limit. Suppose- 0-1500 then Lower limit is 0 and upper limit is 1500.
now store you number x in another variable which is dynamic i hope so. in your case it is 1200.
Use condition action-
1. x is greater than 0
And
2. x is less than 1500

if this condition is true then perform action.

Thanks
Hardesh

Was this reply helpful? Yes No
PennyP 55 on at

Like (0)

Report

Hi Hardesh

@Hardesh15
Many thanks for your response. I have tried to set it up as below but still getting an error. Did I understand your response? I have images below of my current flow:

Mnay

Was this reply helpful? Yes No
PennyP 55 on at

Like (0)

Report

Photo of flow run

Was this reply helpful? Yes No
PennyP 55 on at

Like (0)

Report

My Apologies @Hardesh15 the flow was working just the number entered wasn't in between my range so was correct to fail. Many Thanks for your help on this.

Was this reply helpful? Yes No