Unanswered

Flow not running

(0) Share

Report

Posted on by MG-27051438-0

Hello all,

I built a very long flow. It was successfully saved but for some reason, when I try to test it it does not run. If I try manually, it will ask me to perform the triggering action to see it run, but I modify the file and nothing happens. It does not give me an error or anything, it just doesn't do anything.

If I try to automatically use a recently used trigger, it does nothing after I clock on Test. I am clueless as to why this is happening:

Could it be because of the length of the flow? I find that weird because I followed the instructions on a video to create it and it works for them, so I don't know why it's not doing anything for me. And since it is not even giving me an error, I don't know where to start troubleshooting.

Do you have any ideas?

Thank you!

Categories:

Building flows

I have the same question (0)

All responses (2)

Answers (0)

Pstork1 68,923 Most Valuable Professional on at

Like (1)

Report
Copy link

Link copied!

Be aware that it can take up to about 5 minutes for the flow to trigger when adding or modifying a list item, even when testing. Are you waiting that long before deciding it didn't run? Also, what trigger are you using and are you using any trigger conditions?

----------------------------------------------------------------------------------
If this Post helped you, please click "Does this answer your question" and give it a like to help others in the community find the answer too!

Paul Papanek Stork, MVP
Blog: https://www.dontpapanic.com/blog

Was this reply helpful? Yes No
MG-27051438-0 91 on at

Like (0)

Report
Copy link

Link copied!

@Pstork1 Yes, I waited for around 30 minutes and nothing happened. I found the problem, the trigger condition was using the wrong ID. Thank you! :)

Was this reply helpful? Yes No