You’re offline. This is a read only version of the page.
182
I recently tried to switch a functioning gateway from a desktop computer to a server. On doing so, I started getting Bad Gateway errors.
Any ideas as to what is causing this would be appreciated.
Sean
Hi @cdn4lf,
Gateway is an application that can be installed on any servers in the local domain. I haven’t found any docs on how to configure the gateway on a Server.
The only doc I could find on how to install a gateway is here:
https://docs.microsoft.com/en-us/flow/gateway-reference
Please take it for a reference and try again.
Best regards,
Mabel
I'm on a 2016 Server, 2.6ghz, 6GB Ram.
Are there any special instructions for configuring the gateway on a server? I have run a port and network test, everything is reading as open and okay. The rest of the units in my cluster are reading online and the PowerBI queries are running through the gateway correctly.
Please advise.
Hi @cdn4lf,
Which Server are you using?
Please make sure your Gateway is properly configured.
Please check the following doc on installation and configuration of Gateway for a reference:
https://docs.microsoft.com/en-us/flow/gateway-reference
Best regards,
Mabel
#1
WarrenBelz
146,596
Most Valuable Professional
#2
RandyHayes
76,287
Super User 2024 Season 1
#3
Pstork1
65,928
Most Valuable Professional
Share
Report
All responses (
Answers (
