Answered

Condition showing no inputs

(0) Share

Report

Posted on by SeanCWZ

Hi all,

I've created a flow to send Forms responses to a sharepoint list after which, an email notification will be send based on the variables, Compound and Location. I've utilized the switch and conditions to send the email.

However, I keep running into the flow run failed. The error details showed: "The execution of template action 'External_email' failed: an unexpected exception encountered when evaluating branching condition." But my inputs were set to run for action 'External_Email_228'. In addition, I observed that my condition showed 'No Inputs'.

What is the issue and how do I rectify this?

Regards,

Sean

Categories:

Using flows

I have the same question (0)

All responses (2)

Answers (1)

Verified answer

SeanCWZ 9 on at

Like (0)

Report
Copy link

Link copied!

I look through my flow again. I've checked and discover that there is a mismatch in the data type between my varCompound and the value in Case 1 of the Switch function. The varCompound is a string type while the value in the Case 1 is an integer i.e. 190. This causes the flow to be interrupted.

I workaround this by setting the value in Case 1 as "190" making it a string value.

Was this reply helpful? Yes No
Rhiassuring 8,690 Moderator on at

Like (0)

Report
Copy link

Link copied!

In order for it to go directly to a switch branch, the value being evaluated has to be EXACTLY the same as the switch case.

In your case, that'll be varCompound. It looks like it's 226/228 in this instance. Do you have a case in your branches named exactly 226/228? I don't see one. That'd be your problem.

If you were hoping it'd go to that "External Email 228", you'd need to make sure the value you're evaluating is exactly that.

Was this reply helpful? Yes No