There is a problem with this flow's trigger (File system)

(0) Share

Report

Posted on by PVosEska

329

Hello all,

Every so many days (i can't look every day) all flows connected to a certain datagateway installed on a server, get the error that there is a problem with the flow's trigger.

i then go to edit Flow, test the flow, and that solves it, but i have yet to find out why this is happening. I'm nerveous that the flow won't run when it is supposed to run. The datagateway is up and running, had good connection

Any ideas? would be grateful

Categories:

Using flows

I have the same question (0)

All responses (2)

Answers (0)

v-bacao-msft on at

Like (0)

Report

Hi @PVosEska ,

Please check this similar thread and refer to a similar method inside:

https://powerusers.microsoft.com/t5/Building-Flows/Teams-trigger-When-I-m-mentioned-in-a-Teams-channel-is-always/td-p/349352

Please take a try and see if it helps.

Best Regards,

Was this reply helpful? Yes No
PVosEska 329 on at

Like (0)

Report

I tried this multiple times with multiple flows, with no succes sadly. Eveytime i just have to edit the flow, click the connections again, and test the flow. Then it would work again for however many days

Was this reply helpful? Yes No