You’re offline. This is a read only version of the page.
66
Good afternoon all,
So, I'm new to flow, but have had some success these past few days, which led me to getting a little excited about the possibilities for my clients.
However, today I came across an issue with an '@empty' check wich is failing for no apparent reason.
Here's an overview of the flow:
And here's a shot of the output - please note on the GetRecordsCreatedInLast10Minutes filter array, I have 3 records on the output.
Any help would be most welcome.
Hi @A8Tony,
Have your problem be solved?
If your problem has been solved, please go ahead and mark the post as solved by clicking “Accept as Solution” so that this thread will be marked for other users to easily identify!
Best Regards,
Alice
Apologies to All.
the problem wasn't actually in the Check, it was in the following action for the condition, where I was collating the 'GetTheData' (Data Operation - Select). I'd made a spelling error ItemDescriptiok instead of ItemDescription for one of the fields in my operation.
#1
WarrenBelz
146,596
Most Valuable Professional
#2
RandyHayes
76,287
Super User 2024 Season 1
#3
Pstork1
65,928
Most Valuable Professional
Share
Report
All responses (
Answers (
