Unanswered

How do I find the IP address that my PowerApps is using?

(0) Share

Report

Posted on by Mgodby

359

What I'm trying to do is use an Azure Blob connection in my Power App. It works fine when the storage account is set to allow access from all networks.

But when I select "Selected networks" and add my IP address, it gives me this error:

Even when I add my IP address to the Selected networks I still get this error. I'm wondering if PowerApps has it's own IP for the Power App and I need to add that? Does anybody know what might be causing the issue? And does my PowerApp have it's own IP or something and that's what I need to add? Thank you.

Categories:

Governance & administering

I have the same question (0)

All responses (4)

Answers (0)

v-yutliu-msft on at

Like (1)

Report

Hi @Mgodby ,

Requests from Power Apps use IP addresses that depend on the region of the environment that the app is in.

Calls made from an API connected through an app come from these IP addresses:

Region	Outbound IP
Asia	13.75.36.64 - 13.75.36.79, 13.67.8.240 - 13.67.8.255, 52.175.23.169, 52.187.68.19, 127.0.0.1
Australia	13.70.72.192 - 13.70.72.207, 13.72.243.10, 13.77.50.240 - 13.77.50.255, 13.70.136.174, 127.0.0.1
Brazil	191.233.203.192 - 191.233.203.207, 104.214.19.48 - 104.214.19.63, 13.65.86.57, 104.41.59.51, 127.0.0.1
Canada	13.71.170.208 - 13.71.170.223, 13.71.170.224 - 13.71.170.239, 52.237.24.126, 40.69.106.240 - 40.69.106.255, 52.242.35.152, 127.0.0.1
Europe	13.69.227.208 - 13.69.227.223, 52.178.150.68, 13.69.64.208 - 13.69.64.223, 52.174.88.118, 137.117.161.181, 127.0.0.1
India	104.211.81.192 - 104.211.81.207, 52.172.211.12, 40.78.194.240 - 40.78.194.255, 13.71.125.22, 104.211.146.224 - 104.211.146.239, 104.211.189.218, 127.0.0.1
Japan	13.78.108.0 - 13.78.108.15, 13.71.153.19, 40.74.100.224 - 40.74.100.239, 104.215.61.248, 127.0.0.1
South America	191.233.203.192 - 191.233.203.207, 104.214.19.48 - 104.214.19.63, 13.65.86.57, 104.41.59.51, 127.0.0.1
United Kingdom	51.140.148.0 - 51.140.148.15, 51.140.80.51, 51.140.211.0 - 51.140.211.15, 51.141.47.105, 127.0.0.1
United States	13.89.171.80 - 13.89.171.95, 52.173.245.164, 40.71.11.80 - 40.71.11.95, 40.71.249.205, 40.70.146.208 - 40.70.146.223, 52.232.188.154, 52.162.107.160 - 52.162.107.175, 52.162.242.161, 40.112.243.160 - 40.112.243.175, 104.42.122.49, 127.0.0.1
United States (Early Access)	13.71.195.32 - 13.71.195.47, 52.161.102.22, 13.66.140.128 - 13.66.140.143, 52.183.78.157, 127.0.0.1

There are also some required services that your network should not block.

You could check the details here:

https://docs.microsoft.com/en-us/powerapps/maker/canvas-apps/limits-and-config

Best regards,

Was this reply helpful? Yes No

Mgodby 359 on at

Like (0)

Report

Thank you, I will try and those IP addresses and see if things work after. I am using the same azure blob storage connector in Flow, are the IP addresses the same in Flow?

Was this reply helpful? Yes No
Mgodby 359 on at

Like (0)

Report

Thank you for the reply. I added all of the IPs from the US (the region of the environment the app is in) but it's still giving me issues, I still can't create the connection. I am located in Canada but the environment's region is set to USA and is Sandbox. Do you know what else could be causing is?

Was this reply helpful? Yes No
v-yutliu-msft on at

Like (0)

Report

Hi @Mgodby ,

Actually, this connector is supported in all region and all kinds of region.

So region and environments should not be the problem.

Please check your firewall whether block powerapps.

If the problem still exists, I suggest you open a ticket here:

https://powerapps.microsoft.com/en-us/support/

Best regards,

Was this reply helpful? Yes No