Hi @diebold,
You could configure a Filter array under the trigger, filter trigger-body, and then use Condition to determine if there is content in the body of the Filter array. If so, execute the following action.
Note: The value of the Show as output is displayed using numbers.
|
Free
|
0
|
|
Tentative
|
1
|
|
Busy
|
2
|
|
Away
|
3
|
|
working elsewhere
|
4
|
Then in the action configured in If yes branch, as long as Dynamic content of the trigger output is used, replace it with the corresponding Dynamic content of the same name output by Filter array.
Flow work well, as below:
Please take a try.
Best Regards,
Barry
