Re: Parralel flow causing issues - Action Condition Failed
@adrianchy231319 Because the Filter Array action is below your parallel branch, you'll need to check the Configure Run after settings you have set. By default it will be set to is successful. This means that both branches must be successful. In your case, you have the second branch (right side) set to only run if the Get user profile for Assignee action has failed.
This means you will need to set up the configure run after to is successful (left branch) and is skipped and/or failed (right branch). Based on the error being displayed, it looks like the right branch has failed. You might want to troubleshoot this.

For more flow troubleshooting tips—check out This YT Tutorial: 5 Power Automate Troubleshooting FAQs and Helpful Tips for Creating Better Flows
In this tutorial I cover:
✅ How to troubleshoot a false Condition action result
✅ How to get dynamic content when it isn’t selectable from the list of dynamic content
✅ How to troubleshoot an Apply to Each action that isn’t looping through
✅ How to troubleshoot a skipped Apply to Each action
✅ How to troubleshoot a Filter Query
✅ How to use a SharePoint yes/no column in a Filter Query
✅ How to use Compose actions to troubleshoot a Power Automate flow
✅ How to troubleshoot multiple emails being sent
✅ How to troubleshoot multiple Teams messages being sent
To learn more about how to use the Filter Array action, please refer to this recent YT Tutorial I uploaded.
Hope this helps!
If I helped you solve your problem—please mark my post as a solution ✅. Consider giving me a 👍 if you liked my response!
|