How to convert a .txt file content to an array

(0) Share

Report

Posted on by Aurora

364

Hi All,

Like the title says I am looking for help getting file content into an array format. When a file is added to a SharePoint folder, I want a flow to trigger and save the file data to Dataverse. Below is the content of the file:

Date,12022024
Builder ID, 0046
Part Number, 171-CT1-1502
Serial Number,50015856499
,
,
Supplied Blower Voltage at 50% Duty,11.85791
Blower Current at 50% Duty,7.141113
Supplied Blower Voltage at 100% Duty,11.75293
Blower Current at 100% Duty,22.87598
,
Supplied Actuator Voltage at 0%,0
Actuator Current at 0%,9.998779
Supplied Actuator Voltage at 50%,5.908203
Actuator Current at 50%,6.055908
Supplied Actuator Voltage at 100%,11.87012
Actuator Current at 100%,2.645264
,
Ambient Temperature,73.98968
Core Temperature,65.53927
,
Core Nitrogen Pressure,36.20079
,
Leak Test, PASSED
Results: ,Test Passed

^ the .csv file ^

I would like to break it down, so it has a format like:

Date: 12022024
Builder ID: 0046
Part Number: 171-CT1-1502
Serial Number: 50015856499

No matter what I try, I am unable to get it out of the string format and into the array format. Does anyone have any suggestions for how I Can achieve this? I have attached my document as a .xlsx file, as power automate community does not support .csv. The file can be converted to .csv by saving it again.

Any support is greatly appreciated!

Categories:

Building flows

50015856499.xlsx

I have the same question (0)

All responses (2)

Answers (1)

Aurora 364 on at

Like (0)

Report

Edit: I put .txt file in the title, but this is for a .csv file. All my .csv files start out as .txt files, and then get converted .csv. If the flow could work for either file format, that would meet my needs.

Was this reply helpful? Yes No
Verified answer

ManishSolanki 15,091 Super User 2025 Season 2 on at

Like (1)

Report
Hi @Aurora

Here is the sample flow.

In this example, I have stored the csv content in a compose action using expression after getting content of the file:

Expression needs to be added in the expression box as highlighted in the above screenshot:

base64ToString(body('Get_file_content')?['$content'])

Next, add "Select" action to split the content in the array:

Expression used in 'From' parameter:

split(outputs('Compose'),decodeUriComponent('%0D%0A'))

Click 'Switch Map to text mode' button:

Enter below expression in the Map textbox:

replace(item(),',',':')

Finally, add "Filter array" action remove the blank elements & elements containing only ':'. Pass the output of Select action in the "From" parameter:

Click 'Edit in advanced mode' button on the bottom and enter below query:

@and(not(equals(item(), ':')),not(equals(item(), '')))

The output of filter array action will give the desired array.

Output:

If this helps & solves your problem, please remember to give a 👍 and accept my solution as it will help others in the future.

Was this reply helpful? Yes No