You’re offline. This is a read only version of the page.
170
There is a gallery that is selected (G1) . That selection creates a collection from a SP list that another gallery (G2) shows the results. This has been working before, but all of sudden, it no longer shows the data, but does show the number of items in the gallery. I reverted to authoring version 3.24062.17, and it all works like its supposed to. In the example below, it shows 4 items which is correct but not the data.
Hi Everyone,
My problem is also fixed with the update version 3.24064.21. My applications open well with this version.
I had activate the "Disable Explicit..." option before, but this caused a display issue with only the column (Fx). When I disabled this option, the issue is fixed.
Good news 🙂
Hi Everyone!
The newest recommended version 3.24071.7 appears to have fixed the issues in not showing the data. I tested this on a saved copy of the production app and worked flawlessly. I have also tested this on the production app and published the changes and it works. I was about to try the "Disable Explicit..." setting recommended by @WarrenBelz, but then saw that there was a newer version and thought I should give it a go first.
I made no other changes other than simply publishing the newest recommended authoring version noted above. I believe that the Powerapps team saw the issues we were posting about and fixed them. At least I hope so!!
Hope this helps on your issues! Thanks again everyone for replying!!!!
Thank you, your solution fixes the issue with the gallery. But, my application still does not open in version 3.24064.18. I tried version 3.24064.18 by changing the settings “Disable explicit column Selection”, but my apps open only with the version 3.24063.22.
When I change version, Powerapps sets the Publication status of version 3.24063.22 to “TEST”. I don't know if that has any impact.
Best regards
Thanks @WarrenBelz for your help on this and finding a temp solution. I will give it a go over the weekend sometime and report back. Cheers!
@Kedar_til - I believe you raised this as well.
The issue is set out in this thread - there is an issue with the version release. You have used one solution, the other (disable explicit column selection) is below.
Hello everyone,
I am very worried with version 3.24064.18 of POWERAPPS, since my 8 applications no longer open. I reverted to version 3.24063.22, and all of my applications work fine.
I really have no idea what the problem is... 😞
Suggestions?
THANKS
Same problem here, I face a lot of problem with 3.24064.18 e.g.
All the problem above can solved by switch back to 3.24062.17
Its good to know I am not the only one, then I would be really scratching my head.
#1
WarrenBelz
146,524
Most Valuable Professional
#2
RandyHayes
76,287
Super User 2024 Season 1
#3
Pstork1
65,906
Most Valuable Professional
Share
Report
All responses (
Answers (
