web
You’re offline. This is a read only version of the page.
close
Skip to main content

Announcements

Welcome to the Power Platform Communities
News and Announcements icon
Community site session details

Community site session details

Session Id :
Power Platform Community / Forums / Power Apps / Error connecting power...
Power Apps
Suggested Answer

Error connecting power apps with fabric

(1) ShareShare
ReportReport
Posted on by Andre77 2

Tried to "Link to Microsoft Fabric" in power apps tables but I am getting the error:

 

"We ran into an issue: Creation of Fabric Lakehouse failed. You can try again, if this issue persists please contact support. Correlation Id: 2d86cfcb-c0f8-4ace-ab51-16ccddd0fecd."

 

I also tried in a different power apps environment and got a similar error:

 

"We ran into an issue: Creation of Fabric Link failed. You can try again, if this issue persists please contact support. Reason: CreateAndActivateProfileForFabric.CreateProfile failed: Message: An internal error occurred, the profile is in Error state.; ErrorCode:1024;Details:;errorUri:;CorrelationId:;Parameters : [] Correlation Id: c0aaf889-a6c3-4794-9a09-8bdb59337a5c."

 

How can it be solved ?

Categories:
Building Power Apps
I have the same question (0)
  • Trons Profile Picture
    Trons 4 on at

    Also have the exact same error about the creation of Fabric link failing. Tested with an environment that we didn't use during the preview as well, none of our tables seem to synchronise and replicate in dataverse storage at all.

  • ilicmar Profile Picture
    ilicmar 2 on at

    Same at our end. We get the same error on an environment that we didn't use during preview. We tried unlinking Fabric a few times and linking it back to Fabric. Sometimes we get an error immediately and the Lakehouse doesn't get created in Fabric. Sometimes linking process takes a little bit longer and the Lakehouse gets created but the linking process still ends with and error. We don't see any dataverse tables available in Managed Tables.

  • WillsOG1 Profile Picture
    WillsOG1 6 on at

    Same issue here. It looked like the Lakehouse was created but empty. I ended up deleting the botched resources created after the error message. When I try to link the Power Apps to Fabric a second time, I get a message that states the environment is already linked. It never worked, and now it is beyond repair.

  • Vlad_Kv Profile Picture
    Vlad_Kv 11 on at

    Exactly the same issue here. Empty Lakehouse.

  • WillsOG1 Profile Picture
    WillsOG1 6 on at

    It seems like this error is mentioned in troubleshooting. I missed this and ended up deleting the empty Lakehouse. We have another admin attempting to set this up, and if that does not work, we will submit a support ticket. 🤞

  • Trons Profile Picture
    Trons 4 on at

    MS support provided a work around for us - we had to track changes on the bulkoperation entity, unlink from Fabric, wait a few minutes and then re-link. Actually appears to be working the data is now in the process of synchronising. No idea if that workaround is specific to our environment only (our data source is Dynamics).

  • WillsOG1 Profile Picture
    WillsOG1 6 on at

    Thanks so much for sharing the good news. So just enabling tracked changes on that entity, removing the link and the trying to link again fixed it. How did you remove the link? Did you just delete the resources in Fabric or was there some interface? I will give this a shot

  • FM-04121312-0 Profile Picture
    FM-04121312-0 7 on at
    It seems this is issue is becoming more prevalent, we have already un-linked but now when we re-link the same error appears each time, it is like MS did not do a clean-up of files on there side when unlinking, does anyone know of another method to fix this, as waiting for MS support is taking so long and operations has been without reporting for almost 2 weeks now ?
  • Suggested answer
    SaiRT14 Profile Picture
    SaiRT14 1,990 Super User 2025 Season 1 on at
    issue with the environment setup, Fabric Lakehouse creation, or permissions.
     
    pls try the following:
    Navigate to Microsoft Fabric Admin Portal (via Power BI or Azure). Review existing profiles and their status: If profiles are in an error state, delete them and retry. Ensure no conflicting profiles for the same table are being created.
  • FM-04121312-0 Profile Picture
    FM-04121312-0 7 on at
    @SaiRT14 Can you be a bit more specific, what profiles are you talking about, I do not see this setting in the Fabric Admin Portal; I am Fabric Administrator I can see everything? 

    Also be more specific before making your reply a suggested answer.

Under review

Thank you for your reply! To ensure a great experience for everyone, your content is awaiting approval by our Community Managers. Please check back later.

Helpful resources

News and Announcements

Welcome to the Power Platform Communities

Quick Links

Introducing the 2026 Season 1 community Super Users

Congratulations to our 2026 Super Users!

Kudos to our 2025 Community Spotlight Honorees

Congratulations to our 2025 community superstars!

Congratulations to the March Top 10 Community Leaders!

These are the community rock stars!

Leaderboard > Power Apps

#1
11manish Profile Picture

11manish 530

#2
WarrenBelz Profile Picture

WarrenBelz 459 Most Valuable Professional

#3
Haque Profile Picture

Haque 314

Last 30 days Overall leaderboard

Featured topics

Auto-Populate field Power Pages
Gallery Tabs - Show or Hide Tabs based on Field Value
How to patch multiple records at once
Enable Copilot for end users in model-driven apps
Question for everyone : How are you using Create Text GPT in AI Builder?
Community content - sample components, blogs etc. - Link to this page (http://aka.ms/PCFdemos)
Welcome to the Power Apps forum!

Product updates

Microsoft Power Platform Community release plans