Tab Experience Set Default on embedded Powerapps on Sharpeoint

(0) Share

Report

Posted on by Sn3l

Good Morning.

I have created a tabbed experience as per @Rezza Durani tabbed experience instructions.

This is working perfectly. Created 2 x Tabs

I have embedded the app into our Intranet homepage (it displays basic information Birthdays and anniversaries)

but for some reason this does not display any information unless I click on the tab. I would like for this to default to tab1 which is Vartabselected=1

The information displayed on both tabs are in 2 x different horizontal gallery one called anniversaries and one called birthdays.

I have set vartabselected1 on every possible scenario I can think of but still not luck.

Am I missing something

thank you in advance

I have

Categories:

Building Power Apps

I have the same question (0)

All responses (5)

Answers (1)

Verified answer

Bilakanti 1,226 on at

Like (0)

Report
Copy link

Link copied!

@Sn3l - Please check your visible property. for the controls that you need to shown once you click on the first tab.
1. Set Vartabselected=1 onvisible of the screen
2. For all the controls that you need to shown for the first tab, navigate to their visible property and set If(Vartabselected = 1, true, false)

Was this reply helpful? Yes No
Sn3l on at

Like (0)

Report
Copy link

Link copied!

@Bilakanti
Thank you for the response.
1. reset the visible of the screen again to Vartabselected=1
2. Only have one control on the form which is a horizontal gallery and set it to If(vartabselected = 1, true, false)
3. I also changed the display mode on the galley mode to view mode.

It works perfect on the site our HR site where the "Sharepoint integration" was started. It displays tab 1 by default with no user interaction required.

I just does not work on our Intranet site where I have embedded it as a PowerApps webpart via the appid.

It loads perfectly and I can see it as it should be , I just does not focus on tab one. I need to physically click on tab 1 for the data to appear. as per the below listed image

Was this reply helpful? Yes No
Bilakanti 1,226 on at

Like (0)

Report
Copy link

Link copied!

@Sn3l Can you check if your parameter is been passed to it. I suspected that might be the issue.

Was this reply helpful? Yes No
Sn3l on at

Like (0)

Report
Copy link

Link copied!

@Bilakanti

You were right. the parameter did not pass. I fixed it and it is working. Thank you so much for your patience and help.

Was this reply helpful? Yes No
Priyanka20 29 on at

Like (0)

Report
Copy link

Link copied!

Hi @Bilakanti

I am having the same problem with my form. Can you please help me what should I do next?
Below is the screenshot of my current view.

Was this reply helpful? Yes No