Skip to main content
Community site session details

Community site session details

Session Id :
Power Pages - General Discussions
Answered

Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

Like (0) ShareShare
ReportReport
Posted on 20 Mar 2024 16:14:25 by

Hello everbody,

 

I'm new to Power Pages and trying to learn it now. I built a new site from blank, created a table and a view. However, whenever I add a list into a page, it will disappear when the page is reloaded and the error message "

Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)" will be shown instead (the number inside the parentheses is not always the same). I can add the list to the page with no problem and if I click preview after I added the list, I can view and edit the list. But as soon as I click "Sync" or reload the page, the list will be replaced with the error message. After that, when I click preview, I will also just see the error message too.
 
I tried to create a new site from blank and tried adding a list but also faced the same problem. However, when I start a new site from a template, I don't run into this problem. Could anyone please tell me what is the cause of this problem and how can I solve it? Thank you so much in advance.
Categories:
  • CU09120643-0 Profile Picture
    18 on 31 Jan 2025 at 08:31:48
    Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)
    I understand this is an old thread.  But I am facing the exact same issue in one of my website.
    I tried the enhanced model on off suggestion. But its not solving the issue for me.
    Another site in the same environment working without any issues.
    Can anyone help please
  • TechnoKitty Profile Picture
    68 on 22 Apr 2024 at 09:36:44
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    Thank you so much! You saved me from despair.

  • LK246 Profile Picture
    5 on 10 Apr 2024 at 17:01:29
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    I couldn't figure out how to disable enhanced data model until I saw this screenshot. Super helpful. The Dataverse Base Portal package is downloading for me now. Based on other replies, sounds like I can toggle back to enabling the enhanced data model once the new package downloads and all should work.

  • Lucas001 Profile Picture
    2,230 Super User 2025 Season 1 on 26 Mar 2024 at 09:06:31
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    Hello @Yo_y , @davidkr, @GWham1 , @PowerBi-Rick , @seth_clossman,

     

    my ticket has been solved by my solution provided. Unfortunately it seems the feature for a seamless integration of older portals, power pages and enhanced power pages is not working to our needs. I submitted an idea to improve that flow and resolve those missing dependencies automatically.

     

    I would appreciate it if you could support my idea: https://ideas.powerpages.microsoft.com/d365community/idea/d5520cc1-4feb-ee11-a73d-6045bdb47ea9

     

    Many thanks

  • Yo_y Profile Picture
    13 on 25 Mar 2024 at 16:30:05
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    @Lucas001 solution worked for me (thanks!); I noted the error seems related to some missing legacy website packages.

     

    At the beginning, I had only "Power Pages Blank Template V2 (3.0.2402.10)

    I switched off the enhanced data model.

    Created a new site from blank. 

    Then a website package "Dataverse Base Portal 9.3.2402.106" is automatically being installed (it takes long time /2h). Got also the "Power Pages Blank Template 1.2402.3"

     

    ppages packages.png

     

    Btw, the "portal management" powerapp has been added.

  • KR-24070732-0 Profile Picture
    on 22 Mar 2024 at 05:40:06
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    This did solve my problem. Thank you!

  • Verified answer
    Lucas001 Profile Picture
    2,230 Super User 2025 Season 1 on 21 Mar 2024 at 16:41:12
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    Hi @davidkr, @GWham1, @PowerBi-Rick, @seth_clossman,

     

    that sounds strange but could one of you try disabling the enhanced data model for that envr.,

    create a blank new power page (old model), enable enhanced data model and than check if the problem is resolved?

     

    That workaround did the trick in a similar error for me.



    --------------------------------------------------------------------------------------

    Hope that helps.

    If the post solves your problem, please mark it as solution. If it helps, consider a thumbs up.

  • GWham1 Profile Picture
    on 21 Mar 2024 at 08:21:10
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    There has been some strange behaviour recently. I suspect you may need to contact Microsoft for assistance.

     

    It may be worth checking your portal version to ensure you're on the latest version.

     

    You can see this at http://yourportalurl.com/_services/about

  • PowerBi-Rick Profile Picture
    80 on 21 Mar 2024 at 03:03:31
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    David you are not alone. I created a new site Sunday and had the same problem. I am using the Enhanced Data Model. The list displays fine when initially added to the page. When I Sync the first time in the Power Pages Designer the adx_entiylist error shows. The Web page shows the list properly and I can refresh the Web page and it still works. Sometimes when I Sync again, the liquid error also wipes out the List on the Web page and the Web page loads with the adx_entitylist error. 

     

    I tried deleting and rebuilding the page multiple times. I deleted the entire site and built a new one. The same thing happens on the new site. In both sites I opted to use the new list format. Then I tried it with the old list format and had the same issue.

     

    PowerBiRick_0-1710989632591.png

     

    PowerBiRick_1-1710989669651.png

     

     

     

     

  • seth_clossman Profile Picture
    6 on 21 Mar 2024 at 00:34:20
    Re: Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

    Definitely using the Enhanced Data Model (since it is enabled now by default).  The liquid error I'm receiving says "Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2600911). "

    seth_clossman_0-1710981162205.png

    Is this some piece of legacy code in Power Pages looking for the adx_ version of the table?

Under review

Thank you for your reply! To ensure a great experience for everyone, your content is awaiting approval by our Community Managers. Please check back later.

Helpful resources

Quick Links

Paul Stork – Community Spotlight

We are honored to recognize Paul Stork as our July 2025 Community…

Congratulations to the June Top 10 Community Leaders!

These are the community rock stars!

Announcing the Engage with the Community forum!

This forum is your space to connect, share, and grow!

Leaderboard > Power Pages

#1
Lucas001 Profile Picture

Lucas001 60 Super User 2025 Season 1

#2
Fubar Profile Picture

Fubar 55 Super User 2025 Season 1

#3
surya narayanan Profile Picture

surya narayanan 35