web
You’re offline. This is a read only version of the page.
close
Skip to main content

Announcements

Welcome to the Power Platform Communities
News and Announcements icon
Community site session details

Community site session details

Session Id :
Power Platform Community / Forums / Power Apps / Versions history page ...
Power Apps
Unanswered

Versions history page broken for SharePoint forms + forms broken

(0) ShareShare
ReportReport
Posted on by R3dKap 1,594

Hi @Anonymous,

Anyone else faced to the same problem below ?

Seems like there is a problem currently with the PowerApps engine for customized SharePoint forms. Not only the page that shows history versions for a form is broken (see first capture below), but the forms themselves are broken (all datacards are misplaced and the form won't run in SharePoint anymore) and whatever version I try to recover, the form stays broken (see second capture).

This started just a couple of hours ago... And I've made some tests on differents tenants with the same result.

 

Image 1.png

 

Here is my form that is broken now:

Image 2.png

The forms don't load anymore:

Image 3.png

The tenants are located in Europe (I don't know if this is relevant)...

Would anyone have inputs about a possible issue at the moment with the PowerApps engine ?

Emmanuel

Categories:
Building Power Apps
  • chmoncayMSFT Profile Picture
    chmoncayMSFT Microsoft Employee on at

    Hi @R3dKap , These screens you're showing are working for me right now.  I just created a new list / customized form for another forum post.  I will ask around.

  • chmoncayMSFT Profile Picture
    chmoncayMSFT Microsoft Employee on at

    There is currently an outage in Europe which might affect users manipulating their tenants.  I'm guessing this is what you are seeing right now.

     

    Sorry for any inconvenience.

  • R3dKap Profile Picture
    R3dKap 1,594 on at

    Hi @chmoncayMSFT,

    Do you have any news about this outage in Europe? Or any page where I can follow its status? Because the versions history page is still broken on my different tenants located in Europe. And my SharePoint form I was working on last friday is totally messed up. I can still access to it with the PowerApps builder but it seems that most of the formulas are not interpreted any more.

    For instance, most of my controls  in my form have the DisplayMode set (by default) to Parent.DisplayMode. But when I look at the DisplayMode property in the Property tab, it shows no value. So I have to edit and make a change in the formula so it is re-interpreted again (see video below):

    Image 2.gif

    Also, some datacards have shrinked and their DataCardValueXXX control is not displayed at the correct Y coordinate while the formula is correct. And as in the example above, if I just make a fake modification to the formula then the control relocates correctly:

    Image 1.gif

    Strangly, the forms I had published earlier during the week work fine. It's just this one, which I was working on when (I guess) the outage in Europe started, that went crazy since then. I'm not even sure that "repairing" it this way will make it work again.

    Is there anyone in the PowerApps team that could have a look at this on monday? I'm located in Paris timezone... Feel free to contact me through a private message if needed.
    Here are my session information:
    ID de session : b5f5c2d3-a0a5-4b5a-ad6f-93cf9feb2046

    PowerApps 3.19061.14

    Thanks for your help,

    Emmanuel

  • R3dKap Profile Picture
    R3dKap 1,594 on at

    @chmoncayMSFT,

    I tried to "fix" my form by correcting all formulas I thought could need a repair and tried to republish it to SharePoint. But the form crashes when it's launched:

    Image 1.png

    I really need help here cause I can't imagine redoing this form all over again, especially since I should be on holidays at the moment :(.

    Here's the session id of the crash: 98bebae4-af11-474e-97cf-d8c0dca20734.

    Thanks for your help with this matter,

    Emmanuel

  • v-xida-msft Profile Picture
    v-xida-msft Microsoft Employee on at

    Hi @R3dKap ,

    I have made a test on my side, and don't have the issue that you mentioned. The screenshot as below:

     

    Please consider clear cache of your browser, then open your Version History page of your custom form again, check if the issue is solved.

    Note: Recently, there is something issue with the Custom form created using PowerApps in SP List. Now the issue has been fixed.

     

    If the issue still exsts, please consider re-move the custom form from your SP list, then re-add a new one for it, check if the issue has been fixed.

     

    Best regards,

  • rikdekoning Profile Picture
    rikdekoning 281 on at

    @v-xida-msft This issue hasn't been fixed yet!

     

    I'm experiencing the same issue and so are others. When I want to see the details/version history of my SharePoint PowerApps Form by going to my SharePoint list > List settings > Form settings > See versions and usage, I get the 'Sorry, there's been a disconnect' error as stated above.

     

    This happens on multiple tenants and multiple browsers.

     

    Seems like the redirect URL is incorrect: https://make.powerapps.com/apps/<APPID>/details

    When I go to https://make.powerapps.com/environments/<ENVIRONMENTID>/apps/<APPID>/details, I don't get the error can see the App details and version history.

     

    Please fix this ASAP, since this is not a great workaround.

  • Community Power Platform Member Profile Picture
    Community Power Pla... Microsoft Employee on at

    Hi @rikdekoning I'm sorry you're experiencing this issue. Can you please provide more information such as session I.D.s so the team can try and diagnose the problem?

     

    @Anonymous 

  • rikdekoning Profile Picture
    rikdekoning 281 on at

    Hi @Anonymous ,

     

    Unfortunately, PowerApps doesn't provide me with a session ID when browsing to versions and usage via SharePoint.

    The SharePoint link points to https://web.powerapps.com/apps/5c4d5a15-03ad-41d6-896a-1fbe7798ab60/details. This gets redirected to https://make.powerapps.com/apps/5c4d5a15-03ad-41d6-896a-1fbe7798ab60/details which will give me attached error page.

     

    When I modify the URL to include the environment ID, I get redirected to the correct page: https://make.powerapps.com/environments/Default-9b802d8b-33fa-40fb-acb7-9ffdbd1919eb/apps/5c4d5a15-03ad-41d6-896a-1fbe7798ab60/details. It seems like some part of the URL from SharePoint is missing.

     

    powerappserror.png
  • rikdekoning Profile Picture
    rikdekoning 281 on at

    @Anonymous 

    Error is still there. Can you give us an update? This is becoming very frustrating that such a basic functionality does not work anymore and it seems like there is no progress what so ever

Under review

Thank you for your reply! To ensure a great experience for everyone, your content is awaiting approval by our Community Managers. Please check back later.

Helpful resources

News and Announcements

Welcome to the Power Platform Communities

Quick Links

Season of Sharing Community Challenge Winners!

Congratulations to our community stars!

Kudos to our 2025 Community Spotlight Honorees

Expanding mentorship, skilling, and AI innovation

Congratulations to the August Top 10 Community Leaders!

These are the community rock stars!

Leaderboard > Power Apps

#1
11manish Profile Picture

11manish 397 Super User 2026 Season 2

#2
Mohsin Ali Profile Picture

Mohsin Ali 354

#3
WarrenBelz Profile Picture

WarrenBelz 232 Most Valuable Professional

Last 30 days Overall leaderboard

Featured topics

Auto-Populate field Power Pages
Gallery Tabs - Show or Hide Tabs based on Field Value
How to patch multiple records at once
Enable Copilot for end users in model-driven apps
Question for everyone : How are you using Create Text GPT in AI Builder?
Community content - sample components, blogs etc. - Link to this page (http://aka.ms/PCFdemos)
Welcome to the Power Apps forum!

Product updates

Microsoft Power Platform Community release plans