Post adaptive card and wait for response timeout

(0) Share

Report

Posted on by CU16021406-1

1,042

Dear Experts,

I want to use an adaptive card in Teams using the virtual agent chatbot. So I use the virtual agent connector

and the Post adaptive card and wait for response connector.

Only when i run my flow. It show the adaptive card in teams and waits for the user to response by clicking on a action-submet button but nothing happens the flow is waiting and waiting until it timeout.

What do i do wrong?

Categories:

Building flows

I have the same question (0)

All responses (8)

Answers (0)

schwibach 2 Moderator on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

There is no recipient in your adaptive card.
Is that just now for showing us or is that an oversight?
Second, does the user submit the card and nothing happens?
Third question: is the flow running in your default environment or in a different one? (If so, try it in the default environment)

Was this reply helpful? Yes No
CU16021406-1 1,042 on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

1. I have left the recipient out. This is private data. 2. i run my chatbot and run the flow i see the adaptive card but when i press on the button of the adpative card nothing happens, i get no update message. And the flow is waiting and waiting until it reach the timeout. 3. Default enviroment

Was this reply helpful? Yes No
schwibach 2 Moderator on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

Can you try changing the 'Post as' to the PowerAutomate bot and see if that makes a difference.
It's the only difference to my flows that I can see that would explain it...
If that doesn't work, you could use the new trigger action for Adaptive Cards in teams and have that trigger listen for the cardtypeID... so you'd split up the flow.

Was this reply helpful? Yes No
CU16021406-1 1,042 on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

post as to the PowerAutomate works fine. But then i get 2 flows in teams:
And i would like to show the adaptive card in Virtual agent and not in power automate.

P.

Was this reply helpful? Yes No
schwibach 2 Moderator on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

I understand. I'm just trying to troubleshoot.
If the code works fine using a flow bot and it's not working using the Virtual Agent bot, then it's the system and not your code that's the problem.

Was this reply helpful? Yes No
CU16021406-1 1,042 on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

I think you can not use the adaptive card in teams with response using the virtual agent connector:

After pressing the button it is still waiting until it reaches an timeout.
Is there perhaps a workaround?
Gr. P

Was this reply helpful? Yes No
Dg12 2 on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

Hello, @PeKi72 ,
Was this issue ever solved? I'm stuck in a similar situation with my chatbot right now.

Was this reply helpful? Yes No
CU16021406-1 1,042 on at

Like (0)

Report

Re: Post adaptive card and wait for response timeout

No 😞

Was this reply helpful? Yes No